EXPANSION AND STRUCTURAL JOINTS

The clips for for expansion joints of natural aluminium.  The clip is placed under the strip and pressed into the joint between the two surfaces with a distance of 30-50 or 50-80 mm. The clips are mounted at a distance of about 50 cm without the need to drill the surface. Used for floors, walls and ceilings.

COVER JOINT / working joint, cover type, made of natural aluminum, to withstand vertical loads due to pressure in large buildings or complexes. The cover joint is placed on existing surfaces, above the gap between two separated surfaces with a distance of 40-50 mm. and is mounted on one side at intervals of 35 cm.. For the movement of forklifts up to 70 kN and cargo trucks up to 600 kN.

They provide cost efficient and simple solutions to cover interior or exterior floor joints. Monoblock covers can easily be installed by means of clamps and/or butyl tapes for different models. Different load capacities from pedestrian to vehicle are available. Floor covers are designed to align with wall models and manufactured with smooth or striated surface finish. Pure metal structure doesn’t require a special maintenance.

COVER JOINT / working joint, cover type, made of natural aluminum, to withstand vertical loads due to pressure in large buildings or complexes. The cover joint is placed on existing surfaces, above the gap between two separated surfaces with a distance of 50-60 mm. and is mounted on one side at intervals of 35 cm.. For the movement of forklifts up to 45 kN and cargo trucks up to 120 kN.

They provide cost efficient and simple solutions to cover interior or exterior floor joints. Monoblock covers can easily be installed by means of clamps and/or butyl tapes for different models. Different load capacities from pedestrian to vehicle are available. Floor covers are designed to align with wall models and manufactured with smooth or striated surface finish. Pure metal structure doesn’t require a special maintenance.

COVER JOINT / working joint, cover type, made of natural aluminum, to withstand vertical loads due to pressure in large buildings or complexes. The cover joint is placed on existing surfaces, above the gap between two separated surfaces with a distance of 50 mm. and is mounted on one side at intervals of 35 cm.. For the movement of forklifts up to 30 kN and cargo trucks up to 600 kN.

EXPANSION JOINTS are a range of structural expansion profiles of natural aluminium with knurled flat surface and a black or grey synthetic rubber insert. Made to withstand vertical, horizontal and transversal structural movements due to compressive and tensile stress in large buildings or complexes. The joint is laid on existing surfaces, also vertically, over the void between the two semi-detached surfaces of the same building or between two bays. It withstands pedestrian traffic.

EXPANSION JOINTS are a range of structural expansion profiles of natural aluminium with knurled flat surface and a black or grey synthetic rubber insert. Made to withstand vertical, horizontal and transversal structural movements due to compressive and tensile stress in large buildings or complexes. The joint is laid on existing surfaces, also vertically, over the void between the two semi-detached surfaces of the same building or between two bays. It withstands pedestrian traffic.

EXPANSION JOINTS are a range of structural expansion profiles of natural aluminium with knurled flat surface and a black or grey synthetic rubber insert. Made to withstand vertical, horizontal and transversal structural movements due to compressive and tensile stress in large buildings or complexes. The joint is laid on existing surfaces, also vertically, over the void between the two semi-detached surfaces of the same building or between two bays. It withstands pedestrian traffic and also vehicles with rubber tyres loaded up to 700 kg.

EXPANSION JOINTS are a range of structural expansion profiles of natural aluminium with knurled flat surface and a black or grey synthetic rubber insert. Made to withstand vertical, horizontal and transversal structural movements due to compressive and tensile stress in large buildings or complexes. The joint is laid on existing surfaces, also vertically, over the void between the two semi-detached surfaces of the same building or between two bays. It withstands pedestrian traffic and also vehicles with rubber tyres loaded up to 700 kg.

CJ H20 - H40AREA RANGE OF PROFESSIONAL STRUCTURAL JOINTS FOR FLOORS LAID ON MORTAR BED (H20) AND (H 40). THEY ARE MADE WITH A PUNCHED ALUMINIUM BASE AND A VINYL RUBBER INSERT AVAILABLE IN BLACK OR GREY.

CJ H20 - H40AREPROFILES FOR LAYING WITH MORTAR MUST HAVE THE FLANGES FIXED TO THE SUBSTRATE BY SCREWS ANDSCREW ANCHORS (APPROX. EVERY 30 CM).

CJ H20 - H40 ARE A RANGE OF PROFESSIONAL STRUCTURAL JOINTS FOR FLOORS LAID ON MORTAR BED (H20) AND (H 40). THEY ARE MADE WITH A PUNCHED ALUMINIUM BASE AND A VINYL RUBBER INSERT AVAILABLE IN BLACK OR GREY.

CJ H20 - H40AREPROFILES FOR LAYING WITH MORTAR MUST HAVE THE FLANGES FIXED TO THE SUBSTRATE BY SCREWS ANDSCREW ANCHORS (APPROX. EVERY 30 CM).